MCBSTM32F400 Starter kit (includes ULINK-ME)

SKU : MCBSTM32F400UME

The Keil MCBSTM32F400 Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 F4xx series of ARM Cortex™-M4 processor-based devices.

Features

 - 168MHz STM32F407IG ARM Cortex™-M4 processor-based MCU in 176-pin BGA

 - On-Chip Memory: 1MB Flash & 192KB RAM

 - External Memory: 8MB NOR Flash, 512MB NAND Flash, 2MB SRAM, 8KB I2C EEPROM with NFC interface

 - 2.4 inch Color QVGA TFT LCD with resistive touchscreen

 - 10/100 Ethernet Port

 - USB 2.0 Full Speed - USB, USB-OTG, & USB Host

 - USB 2.0 High Speed - USB, USB-OTG, & USB Host

 - 1 CAN Interface

 - Serial/UART Port

 - MicroSD Card Interface

 - 5-position Joystick

 - 3-axis digital Accelerometer

 - 3-axis digital Gyroscope

 - Analog Voltage Control for ADC Input (potentiometer)

 - Audio CODEC with Line-In/Out and Speaker/Microphone

 - Digital Microphone

 - Digital VGA Camera

 - Push-Buttons for Reset, Wakeup, Tamper and User

 - 8 LEDs directly connected to port pins

 - Power Supply via:

  - High Speed and Full Speed USB (micro) connectors

  - Power jack (8V-12V) with Voltage Regulator capable to supply both USB host interfaces (500mA each)

 - Debug Interface Connectors

  - 20 pin JTAG (0.1 inch connector)

  - 10 pin Cortex debug (0.05 inch connector)

  - 20-pin Cortex debug + ETM Trace (0.05 inch connector)

Evaluation Software

The MCBSTM32F400 Evaluation Board and Starter Kit include the MDK-Lite development tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCBSTM32F400 and a Quickstart guide are included.

The new ULINK-ME Debug Adapter now supports the 10-pin Cortex Debug Connector available on the latest Keil Evaluation boards. The ULINK-ME connects your PCs USB port to your target system (via JTAG or SWD) and allows you to program and debug embedded programs on the target hardware.

Using the ULINK-ME adapter together with the Keil µVision IDE/Debugger, you can easily create, download, and test embedded applications on target hardware.

ULINK-ME Features:

 - JTAG speed up to 10MHza

 - Serial Wire Debug (SWD) support for ARM Cortex-M based devices

 - Serial Wire Viewer (SWV) Data Trace for Cortex-M3 and Cortex-M4

 - Real-Time Agent with memory R/W during execution, terminal emulation, and serial debug output

 - Seamless integration with the Keil µVision IDE & Debugger

 - Target Voltage: 3.0V - 3.6V

 - USB powered (no power supply required)

 - Plug-and-Play installation using standard Windows USB drivers

 - Target Connectors

 - 10-pin (0.05") - Cortex Debug Connector

 - 20-pin (0.10") - ARM Standard JTAG Connector

ULINK-ME may be used for:

 - On-chip Debugging (using on-chip JTAG, SWD or SWV)

 - Flash Memory Programming (using user-configurable Flash programming algorithms).

Debugging Features:

 - RAM Breakpoints                  Unlimited

 - ROM Breakpoints (ARM7/9)         2 max

 - ROM Breakpoints (Cortex-M3)      8 max

 - Execution Breakpoints

 - Access Breakpoints (ARM7/9)      2 max

 - Access Breakpoints (Cortex-M3)    4 max

Debugging Support:

 - Real-Time Agent (ARM7/9)

 - Serial Wire Debug (Cortex-M)

 - Data Trace (Cortex-M3)

 - (Serial Wire Viewer)

Performance:

 - JTAG Clock           <= 10MHz

 - Memory R/W          ≈ 28KB/s

 - Flash R/W             ≈ 25KB/s

 - Data Trace Streaming  1Mb/s

Connectors:

 - 10-pin (0.05") (Cortex Debug Connector)

 - 20-pin (0.1") (ARM Standard JTAG Connector)

Supported Device Families:

 - LPC950 (8051)

 - ARM7

 - ARM9

 - Cortex-M0

 - Cortex-M1

 - Cortex-M2

 - Cortex-M3

 - Cortex-M4

Part No : ELE-WA070827626