USB Micro-B Connector Breakout Board

SKU : USBM-BCBB

This simple board breaks out all five pins of a USB Micro-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB’s differential data signal. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1"-spaced pins on the board. The included 1×5 straight male header can be soldered to these pins to allow the board to be used with standard perfboards, solderless breadboards, and 0.1" connectors.

This tiny unit measures only 0.39" × 0.5" (0.44" × 0.5" including its USB micro-B connector) and has two 0.086" diameter semi-circular holes for mounting with #2 or M2 screws.

Dimensions

 - Size: 0.44″ × 0.5″ × 0.15″1

 - Weight: 0.4 g2

Notes:

 - 1. Without included optional headers. This measurement includes the USB Micro-B connector, which extends 0.05″ past the edge of the PCB.

 - 2. Without included optional headers.