USB to UART Converter

SKU : USBtUARTC

Serial communication is most popular interface between device and this applies to microcontroller and computer. UART is one of those serial interfaces. Classically, most serial interface from microcontroller to computer is done through serial port (DB9). However, since computer serial port used RS232 protocol and microcontroller used TTL UART, a level shifter is needed between these interfaces. Recently, serial port of computer have been phase out, it have been replaced with USB. Of course most developer chooses USB to serial converter to obtain virtual serial port. The level shifter is still necessary for UART interface. Thus, Cytron decided to develop a USB to UART converter which offers USB plug and play, direct interface with microcontroller and it provide low current 5V supply from USB port.UC00A are compatible for Window XP and Vista and it appear as Virtual COM port on computer.

Features:

   - Low cost yet reliable USB to UART converter.

   - Easy to use USB to UART converter, aiming development between computer and microcontroller, 5V logic.

   - USB powered, no external source is required to use this converter

   - 5V from USB port is available for user.

   - Easy to use 4 pin interface: Tx, Rx, Gnd and 5V.

   - CTS, RTS, DTR and DSR is pull out to standard 2x5 header pin solder-able PCB pad.

   - Plug and Play.

UC00A come with:

   - 1 x UC00A board.

   - 1 x 2510 4 ways connector.

   - 4 x 2510 iron pins.

   - USB driver and User’s Manual should be downloaded from following links.

Dimension: 4.6cm x 1.8cm